Due to huge traffic and congested roads, driving a car is a careful job. The fear of bumping your car is always in back of your mind. But although with lot of carefulness, accidents do happen. Without your intention, some wreckless driver could hit your car causing unwanted dents. Or some miscalculation could cause you to slam your car to some hard objects. These type of dents in your car ruins the shape of your car. And you want to get those car dent repair. For that surely you can take the service of denting and painting. But the price tag that comes along with it is too expensive for your to afford.
There are paint less technique for removing dents from the car. These techniques can not only be done without denting skills, but also saves some hard earned money. But considering the fact that it depends upon where the dent is actually is. Dent in the aluminum part is hard to remove with paint less dent technique.
Some of the methods for quick dent removals out of your cars are:
The plunger technique: Car Dent Repair
This is one of the simple technique to fix your cant dent. You don’t need some complicated tools to get the dents out of your car. Just a toilet plunger does the work.
Still some rules need to follow using this technique. Make sure that you wet the plunger and the dented area of the car. This will lessen the chances of damaging your car and adds an extra layer of suction.
Next step to follow is to plunge the dented area until dent is popped back into place. This technique fix the major dent of the car but still some small dent remains in the affected part. Those can be removed from other techniques below.
The Dry Ice Technique:
Dry ice may be used to get out dents. Hold a bit of ice down onto the dent Provided that you are wearing gloves till you hear that your dent pop back in to position and rub it.
It must pop out if the dent is not too heavy, although use as many times as you want to. It is also possible to try heating the dent up , with something such as a hair drier (like the hairdryer and compacted air tip over ), then apply the dry ice to it.
The Boiling Technique: Car Dent Repair
Reversing to an object is one of the easiest ways to get a dent. Because of how rigid the plastic is so for bumpers, even if you try to take off the bumper, it may be tough to push the dent out. Solve this issue by boiling some water in a pot and throwing it.
Hit behind the bumper, as soon as you have poured the water and try to pop straight the dent in. Thanks to the warmth of the water, the plastic needs to be flexible, making it easier to put into position.
You are going to need to work quickly since the heat will not last long. Keep sipping boiling water on it till you’ve popped it all of the way back out, if the dent does not go out.
Vacuum Cleaner & Pot Technique:
Suction is 1 method to get a dent out, however, the problem is locating a dent puller. Well, why don’t you simply create your own? All you will need is a pot (or bucket), a vacuum cleaner and some tape and you’re able to find that dent out of your vehicle very quickly.
Make a small hole underneath the kettle, tape the pot round the dent, then set the vacuum cleaner hose above the pit below the kettle, and turn in your vacuum. Your own score should pop out if the dent is not too shallow.
The Hair Dryer Technique:
Another popular method for car dent repair out of plastic material involves using two hot home products: a hair dryer and compressed air.Start off by heating the car dent at its highest temperature, which will extend the car’s plastic. As soon as it’s hot enough, grab the can of compressed air, turn it upside down, and begin spraying on that same area. The dent will pop out, since the cold air will cause the vinyl to contract.
Hot Glue, Wooden Dowels & Screws Technique:
When you try to take yourself out, you always put chip the paint or the risk that you might further damage your car, whether you make the car dent repair worse. A secure method of trying to carry out enormous car dent repair on your car is using several wooden dowels, a few screws, and a hot glue gun.
Simply place two nails into each side of the dowel and set the hot glue. Put the dowels glue-side down in regions around the dent, repeat as many times as necessary to pay the area, let them dry, and pull out each before the dent is gone.